LG LSB5682SW Manuel Du Propriétaire page 18

SETTING PREHEATING ALARM
LIGHT ON/OFF
The interior oven light automatically turn on when the oven
door is opened.
When oven reaches set-temperature after preheat, the oven
notifies preheat-end by flashing oven lamp until door is
opened.
You can activate or deactivate smart oven light feature.
Default Setting is on.
To set smart oven light on/off
1. Press COOK & WARM pad for 3
seconds.
2. Press "4" pad. The display will
show "PrE On".
3. Press "4" pad to switch between
the "On" and "OFF".
4. Press START pad to accept the
change.
SETTING BEEPER VOLUME
The beeper volume feature allows you to adjust the volumes
to a more acceptable volume. There are three possible
volume levels.
To set beeper volume
1. Press COOK & WARM pad for 3
seconds.
2. Press "3" pad. The display will show
"BEEP Hi".
3. Press "3" pad to switch beeper
volume (Hi, Lo, OFF).
4. Press START pad to accept the
desired change.
All manuals and user guides at all-guides.com
OPERATION (OPTIONS)
- 18 -
SETTING TEMPERATURE UNIT —
FAHRENHEIT OR CENTIGRADE
COOK & WARM pad control the Fahrenheit or Centigrade
temperature display modes. The oven control can be
programmed to display temperatures in Fahrenheit or
Centigrade. The oven has been preset at the factory to
display in Fahrenheit.
To change display from Fahrenheit to Centigrade or
Centigrade to Fahrenheit:
1. Press COOK & WARM pad for 3
seconds.
2. Press "2" pad. The display will
show "Unit F".
3. Press "2" pad to switch between
the "F" and "C".
4. Press START pad to accept the
desired change.