Publicité
Les langues disponibles
Les langues disponibles
Using a Smartphone and Stereo Group mode
Connect two Sound Tower and use them with your smartphone to enjoy stereo sound.
1. Press the ADD STEREO button on the left Sound Tower system. The "SEARCHING STEREO"
message appears on the display and the LED blinks on the ADD STEREO button.
2. Press the ADD STEREO button on the right Sound Tower system. The "SEARCHING STEREO"
message appears on the display and the LED blinks on the ADD STEREO button.
3. When the connection is made, The "LEFT" message appears on the MAIN Sound Tower system and
"RIGHT" appears on the SUB Sound Tower system.
• The MAIN Sound Tower system outputs left channel sound and the SUB Sound Tower system
outputs right channel sound. Press the ADD STEREO button on the MAIN or SUB Sound Tower
to change the sound channel of the Sound Tower.
4. Play music by connecting your smartphone to the MAIN Sound Tower and Bluetooth.
Sound is output from both Sound Tower.
NOTES
• To use the Stereo Group mode, both Sound Tower systems must be the same model.
• Environmental conditions or other factors with connected devices may have effect on playback
quality.
• If the red LED is on the ADD STEREO, an error has occured in the Stereo Group connection. Try step
1 and step 3 again.
• Remote Controller, BT PAIRING, GROUP PLAY and
systems are disabled while in Stereo Group mode.
• The GROUP PLAY button on the MAIN Sound Tower system is not available while in Stereo Group
mode.
ADD STEREO
Left Sound Tower
(MAIN)
ADD STEREO
Right Sound Tower
(SUB)
(Source) buttons on the SUB Sound Tower
ENG - 10
Publicité
