Publicité
In the event of the use of wood briquettes keep in mind that having a higher calorific value and that the
device can be damaged by overheating.
Majority of waste materials contain harmful substance which can damage the stove, chimney and
pollute the environment.
Incineration of all waste is banned by law. Do not incinerate remnants of plywood since it contains glue
which could result in overheating of the stove.
Recommendations for fuel quantities added once:
Chopped wood (length ~33cm)
First firing
Since the stove is made of cast iron, it is necessary to take into account the tendency of material to
develop cracks due to sudden and uneven heat load.
least 10 hours), burn moderate fire (charging should not be more than half the recommended
amount of fuel for the rated power).
The stove is not equipped with a grid or an ash container, so the ash is to be removed with a spatula
which comes together with the stove. Ash does not have to be removed frequently is good-quality
wood is used.
This type of stove which is not equipped with a grid and an ash container adds to the quality high heat
and the fire does not have to be put out for days, until ashes have to be removed.
Apply moderate fire.
Get familiar with the air flow regulators on the stove.
The stove is coated in high-temperature resistant paint. This particular type of paint will gradually
harden as the stove heats up, the process resulting in smoke and characteristic odor release. That is
why it is necessary to maintain the room well aired and ventilated.
Warning! The paint might be damaged if the first firing is not at moderate heat.
Do not place any objects on the stove. Avoid touching the painted stove parts because this could
result in damages on the non-hardened parts at first firing.
WARNING! Do not use alcohol and petrol or for ignition or re-ignition.
Firing and normal use
It is recommended to use newsprint and small pieces of dry chopped wood as firewood. Place 2 to 3
pieces of chopped wood onto it. Open the air regulator fully.
Do not leave the stove unsupervised until the fire spreads evenly in order to control the fire.
When the fire spreads, place 2 or 3 pieces of wood or wooden briquette on it.
In order keep the fire burning overnight it is best to place 1 or 2 larger pieces of wood or
wooden briquette on it.
With normal use the door is to be kept shut, except when fuel is being added.
If there is an in-built flap in the flue pipe, keep it fully open until the fire spreads evenly.
The stove is designed and constructed in such a way to secure high-quality and clean combustion.
Possible combustion malfunctions can be due to:
- Poor quality and construction of the chimney
- Low air flow (the air regulator on the furnace door is closed hut)
- Unsuitable fuel (poor-quality or humid)
- Too much fuel in the stove
Make sure the stove parts are hot and operated only by adults. This is why it is NECESSARY TO USE
THE PROTECTIVE GLOVE.
Do not use 100% alcohol, gas fuel or some other liquid fuel as firewood. Do not keep any flammable
liquid substances near the stove!
Do not incinerate any type of garbage, especially plastic.
2 to 3 pieces
Therefore, with first firing of the stove (at
Use newsprint and small pieces of dry wood as firewood.
18
app 2,5- 3 kg/h
Publicité
