Publicité
STOVE DECRIPTION
The Trenk cast stove is produced from high-quality gray cast which is considered to be an
ideal constructive, all-purpose material. It is well designed and decorated. It features glass
on the door which adds to the warm sensation of having a fireplace in a room.
From the functional point of view, the specific construction characteristic lies in the fact that
a well-tested way of flue gases combustion and removal - in the form of letter S - have been
applied. The specific method has been successfully tested and appled in the Scandinavian
countries with long and harsh winter periods. Logs lie on ash and are ignited from the front
side, with the primary air circulating in through a regulator placed on the door.
Combustion of the wood happens gradually and is progressing from the front side. A
partition which placed right above the fire directs the flue gases towards the front end where
they burn in flames created by the afflux of the secondary air flow through th shafts by the
glass on the furnace door. The same air flow facilitates the cleaning of the glass, keeping it
clean after a long-term use. The stove comes together with a connection to the flue of Ø120
on the cupola.
Regulation of thermal power is conducted via a manual primary air flow regulator placed on
the furnace door.
The furnace is extremely reliable and facilitates an equal combustion. One ignition at a
minimum power can keep the fire burning for more than 10 hours.
16
Publicité
