Suzuki 99134-10L0 Instructions D'installation page 5

6. Install the Mirror Cover RH① to
the position checked in step 1.
In this step, don't press the
Mirror Cover RH①, yet.
7. Peel the entire release paper of
4 double sided tapes which
were sticked to the surface as
shown in illustration.
8. Press the entire Mirror Cover
RH①, strongly.
NOTE:
Press the Mirror Cover RH ① with
soft towel.
NOTE for treatment
• If the MIRROR COVER becomes dirty, wash out the dirt with water
and wipe the MIRROR COVER with a towel containg neutral deter-
gent.
• Don't use organic solvent like thinner. It may damage the surface of
the MIRROR COVER.
• In case that water including solt like snow melting agent or sea water is
splashed on the MIRROR COVER, wash out it with fresh water at
once.
99134-10L00-000
NOTICE
GENUINE SUZUKI ACCESSORIES
Surface
5/5
①