Publicité
Les langues disponibles
Les langues disponibles
Operating instructions:
• Push the oscillation knob to oscillate
• Pull the oscillation knob to stop
• Plug the power cord into a suitable socket
• Tilt the head up or down to the required position by using a locking mechanism that will hold the
head in the desired position.
• The fan is switched on using the push buttons on switch housing, i.e. 0 = Off , 1 = Low Speed, 2
= Medium Speed, 3 = High speed
Remote control (only model 10030095 and 10030096)
Control the fan speed, the integrated timer (up to 7.5h) and the oscillation mode with the supplied
remote control.
If the control unit does not work, you can directly push the buttons on the PCB control panel to ope-
rate the fan
Power rating: 230V AC ~ 50Hz
According to the European waste regulation 2002/96/EC this symbol on the product
or on its packaging indicates that this product may not be treated as household was-
te. Instead it should be taken to the appropriate collection point for the recycling of
electrical and electronic equipment. By ensuring this product is disposed of correct-
ly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of
this product. For more detailed information about recycling of this product, please
contact your local council or your household waste disposal service.
Producer: Chal-Tec GmbH, Wallstraße 16, 10179 Berlin.
This product is conform to the following European Directives:
2014/30/EU (EMC)
2014/35/EU (LVD)
2011/65/EU (RoHS)
Technical Data
Environment Concerns
Declaration of Conformity
7
Publicité
