Publicité
Les langues disponibles
Les langues disponibles
VA/01 - VA/08
+
M1
Ð
RFID
PROG
PROG
K
USE OF KEYPAD MODULE
Used as access control
A
Used to make calls
B
This product complies with the relevant directives in force.
Decommissioning and disposal. Dispose of the packaging and the device at the end of its life cycle responsibly, in compliance with the laws in force in the
country where the product is used. The recyclable components are marked with a symbol and the material's ID marker.
THE DATA AND INFORMATION SHOWN IN THIS MANUAL ARE TO BE CONSIDERED AS SUBJECT TO CHANGE AT ANY TIME AND WITHOUT THE NEED FOR ANY ADVANCE
WARNING.
MEASUREMENTS, UNLESS OTHERWISE INDICATED, ARE IN MILLIMETRES.
When programming is completed, place the RFID PROG jumper as shown in figure
K.
Via Martiri Della Libertà, 15
31030 Dosson di Casier
Treviso - Italy
(+39) 0422 4940
(+39) 0422 4941
Press key , enter the access code (3 to
8 digits long) and press key
the code is valid a confirmation beep will
sound and the
erwise 3 fast beeps will signal an error
condition A.
Enter the call code (1÷98), followed by
key
: if the code is valid the call will
be made and the
B.
Came S.p.A.
Via Cornia, 1/b - 1/c
33079 Sesto al Reghena
Pordenone - Italy
(+39) 0434 698111
(+39) 0434 698434
www.came.com
again: if
LED will come on, oth-
LED will come on
Publicité
