Oakley BLADE II Manuel D'instructions page 4

For normal use, the crown rests against the case to maintain a protective
seal. The crown can be pulled out to two click positions for setting the date
and time.
To ensure that the date-change function activates at midnight (and not at
noon), synchronize the timepiece by doing the following:
TO SET THE TIME:
1. Pull the crown out to the first
click position (a).
2. Turn the crown clockwise and set
the timepiece to yesterday's date.
3. Pull the crown out to the second
click position (b).
4. Turn the hands forward until
today's date appears, then
continue forward until the
current time is reached. (If the
current time is in the afternoon
or evening, move the hour hand
all the way around the dial to
pass 12 o'clock noon.)
5. Push the crown back down
against the case.
All manuals and user guides at all-guides.com
BLADE INSTRUCTION MANUAL 03
SETTING THE TIME
a b