Publicité
Les langues disponibles
Les langues disponibles
Installation
How to connect the DIGITAL IN Terminal
The video signal is digitally input to the projection display for superior picture quality enjoyment.
Connecting a DTV Decoder to DIGITAL IN
DTV Decoder
AUDIO OUT
By inputting a High-bandwidth Digital Content Protection high-defi nition picture source to the DIGITAL IN terminal of
this projection display, high-defi nition pictures can be displayed on the screen in their digital form. (This terminal is
for use in the future when High-bandwidth Digital Content Protection DTV decoders, DVD players and D-VHS are
put on the market.)
Notes:
• Select the DIGITAL input position by pressing the TV/VIDEO button. (P. 35)
• The DIGITAL IN terminal can only be used with 1080i, 720p and 480p picture signals. Set the DTV Decoder DIGITAL OUT
terminal to 1080i, 720p, or 480p signal output. Please refer to the DTV Decoder instruction manual.
• If no picture is displayed because the DTV Decoder output cannot be set, use the component Video Input, S-Video Input, or
Video Input. This will display the picture as an analog signal.
DIGITAL IN Terminal Pin Layouts
24
17 9
16
8
1
Connection port view
20
All manuals and user guides at all-guides.com
AUDIO
DVI cable
Pin No. Signal name
1
T.M.D.S Data 2-
2
T.M.D.S Data 2+
3
T.M.D.S Data 2 Shield
4
NC
5
NC
6
DDC Clock
7
DDC Data
8
NC
9
T.M.D.S Data 1-
10
T.M.D.S Data 1+
11
T.M.D.S Data 1 Shield
12
NC
NC: Not connected
Pin No. Signal name
13
NC
14
+5 V
15
GND
16
Hot Plug Detect
17
T.M.D.S Data 0-
18
T.M.D.S Data 0+
19
T.M.D.S Data 0 Shield
20
NC
21
NC
22
T.M.D.S Clock Shield
23
T.M.D.S Clock +
24
T.M.D.S Clock -
Publicité
