miniland baby digimonitor 3.5 touch Mode D'emploi page 39

· Video Off Timeout
Maximum time during which the monitor image remains active; after this time the image
disappears but the sound continues to be heard. To reactivate the image just touch the
screen.
Video Off Timeout
You can disable or enable the option by indicating, in the second case, the maximum time
value you want, from 5s to 180s in 5s intervals.
· Recording Schedule
This baby monitor offers the possibility of programming a specific recording period.
Recording Schedule
Start
1 7
time
End
1 7
time
OFF
To enable this option, indicate the time you want recording to start and finish.
If you want this option to remain inactive, press OFF.
· Motion Detection
If you activate the motion detection mode on the monitor and there is no movement around
the camera, the camera will stop transmitting and will appear to be off. The monitor screen
will turn off when the camera is not transmitting. If you want to see you baby at any given
time, even though there is no movement, touch the screen and the image will appear
again. To disable this feature and see the monitored area continuously, disable the MD
mode on the monitor.
MD mode OFF: The camera transmits continuously, enabling you to continuously monitor
your baby or the area you want to protect.
MD mode ON: The camera only transmits when it detects motion of sufficient intensity,
according to the level selected, around the camera.
All manuals and user guides at all-guides.com
:
3 2
:
5 6