miniland baby digimonitor 3.5 touch Mode D'emploi page 37

The icon will then change
the link button (V) of the camera and, if the process has been carried out successfully, the
icon will appear in place of the previous one and the LED indicators will light up green.
If linking is not successful, the icon
channel or with another channel if necessary.
For various reasons, connection may be lost between the monitor and a camera already
linked. In this case, repeat the process explained above to relink the camera to the monitor.
· Date/Time
Access to this submenu allows you to set the date and time appearing on the baby monitor.
Date/Time
2 0 1 3 / 0 2
T i m e : 1 8
OK
· Time alarm
You can set an alarm to remind you of the next feeding time of your baby.
Access the Time alarm submenu to activate or deactivate this alarm and set the time you
want the alarm to sound.
Time Alarm
:
T i m e : 1 7
Alarm ON
Alarm OFF
OK
A beep will sound for 60 seconds at the preset time. Press the menu button (4) to stop the
beep and return to the main menu. The alarm will continue to be set unless you deactivate it.
· Auto Switch Time
This baby monitor offers the possibility of the monitor displaying the image of each camera
for a few seconds on a cyclical basis.
All manuals and user guides at all-guides.com
and the ON/link LED (2) of the monitor will flash green. Press
will appear. In this case, try again with the same
/ 1 2
:
2 3
3 2