miniland baby digimonitor 3.5 touch Mode D'emploi page 38

All manuals and user guides at all-guides.com
Auto Switch Time
5 seg. 30 seg.
10 seg. 1 min.
CAM1 CAM2 CAM3 CAM4
OK
From this submenu you can select the time you want to display the image of each camera
and the cameras to be included in the cycle.
· Zoom
You can increase the size of the image displayed by means of a central zoom. Click on the
+ sign to zoom in or on the – sign to zoom out. It allows for a x3 enlargement, in steps of
0.2 increases.
· TV Out format
With this submenu you can choose the format of the output signal received by your TV. To
see or hear the baby from your TV, connect the AV output connector (12) of the monitor to
the socket of your TV, using an RCA cable (not included).
TV Out Format
PAL
NTSC
OK
PAL: used in most European, African and Asian countries, in some South American
countries and in Australia.
NTSC: used in most of America and Japan.
· Touch Panel calibration
If you find that the touchscreen is not responding properly, you can calibrate it.
To do this, access the submenu and mark the four corners of the screen with your finger,
as indicated by the crosses that appear. After the process, press EXIT.
· Language
You can choose the language in which you prefer to display all the options on the monitor
from among the 8 available: Spanish, English, Portuguese, French, German, Italian, Polish
and Russian.