Berkel BMS 22 T Manuel D'emploi Et D'entretien page 19

3
OPERATION AND CLEANING
Control descriptions
1) Forward gear button "I"
Press the button to start the machine. In the combined
versions, start-up is only enabled when the grater lever is
lowered.
2) Reverse gear button "
Press the button to invert the direction of machine rotation.
In combined versions, start-up is only enabled when the
grater lever is lowered.
3) Stop button "0"
Press the button to stop the machine.
4) Mincer body blocking knob
Screw down the knob to block or screw off to unblock the
mincer body.
Using the mincer
•
Tighten the mincer body-blocking knob.
•
Tighten the handwheel on the output mouth of the mincer without blocking.
•
Start-up the machine by pressing start button "I".
•
Place the product inside the upper mincer mouth and press it down using the pestle supplied.
•
At the end of the work session press the stop button "0".
•
At the end of the work cycle remove the mincer set and wash using suitable detergents in hot water or in
the dishwasher.
Dismantling the mincer set
•
Remove the hopper from the upper mouth.
•
Turn the handwheel anti-clockwise.
•
Extract
the mincing plate;
-
the blade;
-
and the volute in sequence
-
•
Screw off the mincer body-blocking knob and
extract mincer body.
•
Perform operations in reverse order to
reassemble mincer group.
INFORMATION: Prior to each work cycle ensure that the removable parts are properly fixed
All manuals and user guides at all-guides.com
"
to the machine.