Berkel BMS 22 T Manuel D'emploi Et D'entretien page 16

1
GENERAL INFORMATION
Overall dimensions
mm.
BMS 22 T
BMS 32 T
Safety devices
Safety information
•
It is of the greatest importance to carefully read this manual before carrying out installation and use
operations. Consistent compliance with the instructions contained in this manual will guarantee personal
and machine safety.
•
Do not tamper with the safety devices for any reason.
•
We recommend that industrial safety regulations issued nationally by the appointed organisms be strictly
respected.
•
The manufacturer declines all responsability for injures to persons or damages to property, resulting from
failure to comply with these safety rules.
•
Correct machine setting, lighting and workshop cleanness are pre-conditions for personal safety.
•
Do not expose the machine to atmospheric agents.
•
The machine connection and start-up should only be executed by skilled engineers.
•
Check that the plant mains ratings correspond to the specifications printed on the machine data plate.
All manuals and user guides at all-guides.com
A B C mm. A
400 550 670 BMS 22 T 430
450 700 720 BMS 32 T 490
Microswitch: stops the machine when the hopper is removed. When the
hopper is reinserted, restart the machine by pressing the I button (only
BMS 32 T)
Remote control switch: can be used to restart the machine when the
electricity supply is switched off accidentally
B C
350 510
340 530