Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
■ Installation clearances
The location must be large enough to fully open
the washer door.
■ Washer dimensions
• Most installations require a minimum 4 in.
(10 cm) clearance behind the washer.
■
Minimum installation spacing for
recessed area installation.
The following dimensions shown are for the minimum
spacing allowed.
Additional spacing should be considered for
installation and servicing.
• Additional clearances might be required for wall,
door and floor moldings.
• Additional spacing of 1 in. (2.5 cm) on all sides of
the washer is recommended to reduce noise
transfer.
Companion appliance spacing should also be
considered.
6
1
29
/
"
2
(75.0 cm)
[Side view]
1"
27"
(2.5 cm)
(68.6 cm)
[Front view]
■ Level floor
• Allowable slope under entire washer is 1°.
• To minimize noise and vibration, the
washer MUST be installed on a solidly
constructed floor.
• Carpeting and soft tile surfaces are not
recommended.
• Never install the washer on a platform or
weakly supported structure.
NOTE: A firm, solid floor is even more critical to a
front-loading washer than to a top-loader. If
your floor is wood and/or frame construction,
you may need to reinforce it. Front-loaders
use substantially faster spin speeds than top-
loaders, causing greater vibration. If the
floor is not solid, your washer will vibrate.
You will hear and feel the vibration
throughout your house.
■ Power outlet
•
Must be within 60 in. (1.5 m) of either side of
the washer. Do not overload the outlet with
more than one appliance.
•
Time-delay fuse or circuit breaker is
recommended.
NOTE: It is the personal responsibility and
obligation of the customer to have a proper
outlet installed by a qualified electrician.
4"
(10 cm)
1"
(2.5 cm)
Publicité
