Evolite MOVING BEAM15R Mode D'emploi page 13

o Maintenance
Risk of electric shock.

Always unplug the appliance before servicing or performing any maintenance.
Here are a few suggestions if you have any problems with your device.

The appliance does not work at all.
o Check the power cord and fuse.
o Make sure that your plug is correctly plugged in.

The fixture does not respond or does not respond correctly to DMX commands.
o Check your DMX cables
o Check your DMX addressing
o Try another DMX controller
o Check that your DMX cables do not run close to high-voltage cables, which could cause interference.

Does not react to sound
o Check the selected operating mode
o Check that there is no DMX cable connected to DMX IN
o Tap directly on the microphone to test its responsiveness.
 Technical specifications
Model
Voltage
Consumption:
Light source
Gross weight
Flightcase dimensions
Moving Beam 15R User's Manual Ver. 1.00
DANGER!
MOVING BEAm15R
AC100- 240V / 50-60Hz
400W
1 x USHIO 300W lamp
62.8kg
720 x 500 x 660mm
13
Page