Costway Superfit SP37610 Manuel De L'utilisateur page 7

Bluetooth Function
You can hold the phone in the phone holder and then play the phone
music after connecting via Bluetooth.
● Data Display Range
Time ( Minutes/ Seconds )
Speed (MPH)
Distance (Mile)
Calories (KC)
Common Failures and Processing Methods
Please contact our customer service if you have any other questions.
Problems Possible causes
Not connected
Power is not turned on
Treadmill
Safety lock drop
doesn't
work
Circuit signal system
break
The fuse blown out
Insufficient lubrication
The running
belt doesn't
run smoothly
Running belt is too tight
Running belt is too loose
Running
belt slipped
Motor belt is too loose
12
Start Display Range
0:00 0:00-99:59
0.0 0.0-8.0
0.00 0.00-99.9
0.0 0.0-999
Maintenance Methods
Put plug to into the socket
Put the power switch in
position "ON"
Put the safety lock in
correct position
Check the controller input
terminal and signal circuit
Replace fuse
Add silicone oil lubricant
Adjust running belt tightness
Adjust running belt tightness
Adjust motor belt tightness
Possible Cause
Problem
E01
Poor communication
E02 Power assault
Overload protection
E05
Safety lock drop
E07
abnormal
External disturbance
display
Product Maintenance
1. Lubrication
After the running belt has been used for a period of time, it must be
lubricated with a specially configured methyl-silicone oil.
Advice:
1 hour or less per week
★
Less than 3 hours per week
★
★ 3-6 hours per week
More than 6 hours per week
★
Do not lubricate too much. It is not the more lubricants the better.
Remember: Proper lubrication is an important factor in improving
the life of the treadmill.
Maintenance Methods
The signal line is not plugged
in, plug it in again
Power tube breakdown, replace
the electronic controller
Overload, replace electronic
controller
Put the safety lock in the
correct position
Turn off the power switch.
Turn it on after 1 minute
Lubricate once every 6 months
Lubricate once every 3 months
Lubricate once every 2 months
Lubricate once every 1 months
13