tormek MB-102 Multi Base Instruction page 6

EN
Micro Adjust
The edge angle is set by using the Micro Adjust on the Universal Support. Other settings on the
MB-102 Multi Base does not affect the angle.
Sharpening on the Side of The Grinding Wheel
Example shows sharpening a flat bevel on a
chisel with the SE-77 Square Edge Jig.
Example shows sharpening a flat bevel on a V-
tool with the SVS-38 Short Tool Jig.
Tip When sharpening on the side of the diamond grinding wheel with the
MB-102 Multi Base, it can be beneficial to work closer to the grinding wheel
for better control. Try and adjust the height of the machine if necessary or
sit down when sharpening.
6
Example shows sharpening a flat bevel on a knife
with the KJ-45 Centering Knife Jig.