Connecting Output Terminals - PIONEER DJ DJM-450 Mode D'emploi

Connecting output terminals

Control panel
USB port cover
Power amplifier 1
1 Be sure to use the [MASTER1] output terminals only for a balanced output. Connection with an unbalanced input (such as RCA) using an XLR to
RCA converter cable (or converter adapter), etc., may lower the sound quality and/or result in noise.
For connection with an unbalanced input (such as RCA), use the [MASTER2] output terminals.
2 Be careful not to accidentally insert the power cord of another unit to the [MASTER1] output terminals.
Do not connect a terminal which is supplied with phantom power to the [MASTER1] output terminals.
3 When connecting a mobile device, use the cable supplied with the device.
For information on compatible mobile devices, see the Pioneer DJ site below.
http://pioneerdj.com/support/
Mobile device 3
USB hubs cannot be used.
Power speakers 1
Rear panel
Headphones
Front panel
9
En