Monster Power Signature HTPS 7000 MKII Mode D'emploi page 16

1. "ON/OFF" Button: Turns ON/OFF the outlets programmed as "SWITCHED ON" or "SWITCHED ON AFTER DELAY".
2. "Menu" Button: Press to begin programming mode.
3. "Select" Button: Press to set parameters or options selected by the "Menu" button.
4. "Dimmer" Button: Adjusts the brightness of the alphanumeric display.
5. "Audio Filter" Indicator: Indicates power is being supplied to the analog audio outlets.
6. "Digital Filter 1" Indicator: Indicates power is being supplied to the digital outlets.
7. "Digital Filter 2" Indicator: Indicates power is being supplied to the digital outlets.
8. "Video Filter" Indicator: Indicates power is being supplied to the video outlets.
9. "High Current Filter 1" Indicator: Indicates power is being supplied to the ultra-high current outlets.
10. "High Current Filter 2" Indicator: Indicates power is being supplied to the ultra-high current outlets.
11. Digital Input Voltage and Current Usage Meter: Indicates input voltage and amperage draw.
12. "Ground OK" Indicator: Indicates the PowerSource is plugged into a properly grounded 120V AC outlet.
13. "Protection On" Indicator: Indicates Monster surge protection circuitry is functioning properly.
14. "Clean Power On" Indicator: Indicates Monster Clean Power circuitry is functioning properly.
15. "Abnormal Voltage" Indicator: Indicates that the incoming voltage is below approximately 90V AC
or above approximately 127V AC.
16. "Wiring Reversed" Indicator: Indicates the wiring L-N in the outlet that the PowerSource
is plugged into is reversed.
17. Analog Audio Filter: These outlets have a specifically designed filter circuit that reduces interference
to your audio components.
18. Digital Filter 1: These outlets have a specifically designed filter circuit that reduces interference
8
to your digital components.
SIGNATURE HTPS 7000 MKII POWERSOURCE FEATURES