Publicité
Les langues disponibles
Les langues disponibles
5. The Quartz Sleeve can now be accessed for cleaning
or replacement.
6. If replacing or removing the Quartz tube remove the
threaded plastic collar that locks the Quartz Sleeve over
the water-tight seal and remove the quartz tube.
10
All manuals and user guides at all-guides.com
Changing the UV Bulb
1. Always unplug both the pump and the
2. Remove the plastic
3. Inspect area around the base of the control panel before
4. Rotate the Electronic Control Board counter-clockwise
5. Carefully remove the Control Board with attached UV bulb
US 1-866-877-6637 |
UltraKlean
Pond
™
Filter before
releasing the lid
clips to service the
fi lter.
cover surrounding
control panel. The
panel should be
removed without tools.
removing and drain any water that has collected around
this area from rainfall.
to disengage the control board from the lid.
NOTE: Do not touch UV bulb with bare hands,
as the oil from skin will reduce the bulbs
performance and lifespan.
from the lid by pulling STRAIGHT-UP, making sure not to
break the UV bulb.
CAN 1-866-766-3426 | www.aquascapeinc.com
Publicité
