Publicité
Les langues disponibles
Les langues disponibles
Feature Identification
Identify the premium features on your specific model and quickly locate instructions on how to maximize their use.
Configuration DIP Switches: optimize Inverter/Charger
1
operation depending on your application. See Configuration
section for setting instructions.
Operating Mode Rocker Switch: controls Inverter/Charger
2
operation. The "AUTO/REMOTE" setting ensures your
equipment receives constant, uninterrupted AC power. It also
enables the Inverter/Charger to be remotely monitored and
controlled with an optional remote module (Tripp Lite model
APSRM4, sold separately). The "CHARGE ONLY" setting
allows your batteries to return to full charge faster by turning the
inverter off, which halts battery discharging. The "OFF" position
de-energizes the unit (including its AC output). See Operation
section for setting instructions.
Operation Indicator Lights: intuitive "traffic light" signals
3
show whether the Inverter/Charger is operating from AC line
power or DC battery power. It also warns you if the connected
equipment load is too high. See Operation section for
instructions on reading indicator lights.
Battery Indicator Lights: intuitive "traffic light" signals show
4
approximate charge level of your battery. See Operation section
for instructions on reading indicator lights.
DC Power Terminals: connect to your battery terminals. See
5
Battery Connection section for connection instructions.
Hardwire AC Input/Output Terminal Strip (Access Panel):
6
securely connects the Inverter/Charger to facility electrical
system. See Input/Output Connection section for connection
instructions.
All manuals and user guides at all-guides.com
6
On Side,
Not Shown
7
10
Knockouts for AC Input/Output Conduits
7
Remote Control Module Connector: allows remote monitoring
8
and control with an optional module (Tripp Lite model APSRM4,
sold
separately).
manual for connection instructions.
Battery Charge Conserver (Load Sense) Control: conserves
9
battery power by setting the low-load level at which the Inverter/
Charger's inverter automatically shuts off. See Configuration
section for setting instructions.
Main Ground Lug: properly grounds the Inverter/Charger to
10
earth ground. See Battery Connection section for connection
instructions.
Thermostatically-Controlled Cooling Fans: quiet, efficient
11
fans regulate internal temperature and prolong equipment
service life. Fans run at variable speed, depending on temperature
and load.
Remote Generator Start Connector: automatically cycles
12
generator based on battery voltage. Use with user-supplied
cable. See Configuration section for more information.
Remote Battery Temperature Sensing Connector: prolongs
13
battery life by adjusting charge based on battery temperature.
Contact Tripp Lite for optional temperature sensing cable
accessory. See Configuration section for more information.
13
12
4
8
1
3
See
remote
module
3
9
5
2
11
owner's
Publicité
