Publicité
KICK AXLE, SHIFT SHAFT AND PRIMARY DRIVE
GEAR
EC4C5000
ASSEMBLY AND INSTALLATION
EC4C5120
Stopper lever
1. Install:
9 Torsion spring 1
9 Stopper lever 2
9 Spacer 3
9 Bolt (stopper lever) 4
NOTE:
9 Align the stopper lever roller with the slot on
segment.
9 When installing the stopper lever, make sure
that the torsion spring is in the position as
shown.
EC4C5202
Shift guide and shift lever assembly
1. Install:
9 Spring 1
9 Pawl pin 2
9 Pawl 3
To shift lever 4.
2. Install:
9 Shift lever assembly 1
To shift guide 2.
3. Install:
9 Shift lever assembly 1
9 Shift guide 2
NOTE:
9 The shift lever assembly is installed at the
same time as the shift guide.
9 Apply the transmission oil on the bolt (seg-
ment) shaft.
4-42
ENG
10 Nm (1.0 m•kg, 7.2 ft•lb)
Publicité
