Télécharger Imprimer la page

Frigelux RDP214BE Manuel D'instructions page 30

Publicité

Les langues disponibles

Les langues disponibles

4. OPERATING YOUR APPLIANCE
Temperature Control
Your refrigerator has one control for regulating the temperature. The temperature control is located on the
right side of the fridge.
The first time you put your appliance into operation, set the thermostat to "MID" and let it run empty for 4 hours
before storing food for it to cool sufficiently.
The range of the temperature control is from position" MIN" the warmest to "MAX" the coldest. Adjust the
temperature control to the setting that best suits your needs. The setting of "4" should be appropriate for home
or office refrigerator use.
Appliance thermostat has 7 settings. The appliance assures that temperature is maintained as long as it is in
operation and that it is used in normal conditions of use. The temperature inside the appliance can be
influenced by many factors : ambient temperature, sun exposure, number of door opening and amount of food
stored... The slight changes in temperature are perfectly normal.
Setting MIN: Refrigerator compartment average temperature 6~12 °C / Freezer compartment average
temperature below ≤ -12℃
Setting MED: Refrigerator compartment average temperature 1~7 °C / Freezer compartment average
temperature ≤ -15℃
Setting MAX: Refrigerator compartment average temperature 0~4℃ °C / Freezer compartment
average temperature ≤ -18℃
NOTE:
Turning the temperature control to "0" position stops the cooling cycle but does not shut off the power
to the refrigerator.
If the unit is unplugged, lost power, or turned off; you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the refrigerator will not start.
If you choose to change the thermostat setting, adjust thermostat control by one numerical increment
at a time. Allow several hours for temperature to stabilize between adjustments.
Do not leave the door open for too long so that the indoor temperature does not rise too much.
➢ "COLD ZONE" SYMBOLS (Depending on models)
You will find the symbol opposite in your refrigerator. It clearly shows the location of your
appliance's coldest zone: the temperature here is + 4°C or less. A temperature indicator here
enables you to check that your refrigerator is working correctly.
TEMPERATURE INDICATOR (Depending on models)
Temperature to set
Correct temperature
29

Publicité

loading

Ce manuel est également adapté pour:

Rdp214xe