Beko BBIS13300XPE-1 Manuel D'utilisation page 37

9. When the symbol disappears on the
display, remove the remaining deposits
with vinegar water.
10.Touch any key to stop the audible warn-
ing.
After the pyrolysis function is com-
pleted, the door lock will be active
until the oven cools to the appropri-
ate temperature. If you want to
cook at this time, "H" will appear
on the display and cooking will not
be possible.
Self cleaning function with high temperat-
ure – Eco pyrolysis (It varies depending
on the product model. It may not be
available on your product.)
ü If your oven is not very dirty, we recom-
mend using the "Pyrolysis - economy
mode" function. "Pyrolysis - economy
mode" function takes less time than
the Pyrolysis" function. If the oven is
very dirty, the "Pyrolysis - economy
mode" function may not be sufficient.
In this case, clean it by the "Pyrolysis"
function.
1. Remove all accessories inside the oven.
In the models with wire shelves, remem-
ber to remove the wire shelf.
2. Before starting the cleaning, clean the
outer surfaces of the oven and the food
residues inside the oven with soapy
cloth.
3. Select the "pyrolysis" (Pyrolysis) func-
tion.
ð The "P2:00" and "Pro" message is
shown on the display for approx. 2
seconds and then the P2:00 mes-
sage starts to flash.
4. Tap the or key.
ð The "ECO" message is shown on
the display for approx. 2 seconds
and then the P1:30 message starts
to flash.
5. Turn the temperature knob to the
highest "max" (maximum) temperature.
6. When the pyrolysis function is started,
P1:30 lights up and starts counting
down. The pyrolysis time (1.5 hours) is
shown on the display. This time is un-
changeable.
7. When the oven reaches a certain tem-
perature after the pyrolysis process
starts, the
timer display and the oven door cannot
be opened. Do not force the handle to
unlock the door until the cleaning pro-
cess is finished and the lock symbol dis-
appears from the display.
8. When the cleaning process is finished,
"End" appears on the display.
9. After "End" appears on the display, turn
the function and temperature knobs to 0
(off) position to end the process.
10.When the
display, remove the remaining deposits
with vinegar water.
11.Touch any key to stop the audible warn-
ing.
After the pyrolysis function is com-
pleted, the door lock will be active
until the oven cools to the appropri-
ate temperature. If you want to
cook at this time, "H" will appear
on the display and cooking will not
be possible.
7.6 Cleaning the Oven Door
You can remove your oven door and door
glasses to clean them. How to remove the
doors and windows is explained in the sec-
tions "Removing the oven door" and "Re-
moving the inner glasses of the door".
After removing the door inner glasses,
clean them using a dishwashing detergent,
warm water and a soft cloth or sponge and
dry them with a dry cloth. For lime residue
that may form on the oven glass, wipe the
glass with vinegar and rinse.
EN / 37
symbol appears on the
symbol disappears on the
EN
FR