GYS POWERDUCTION 39LG Mode D'emploi page 23

Translation of the original instructions
MADE IN FRANCE
Maintenance:
• If the power cable is damaged, it must be replaced by the manu-
facturer, its after sales service or an equally qualified person to
prevent danger.
• Service should be performed by a qualified person.
• Warning! Always disconnect from the mains before performing
maintenance on the device.
High Voltage and Currents inside the machine.
• If the internal fuse is melted, it must be replaced by the manufac-
turer (GYS' dedicated sales service) or by an equally qualified
person to prevent any accidents.
• Remove the casing on a regular basis, to remove any excess dust.
Take this opportunity to have the electrical connections checked
by a qualified person, with an insulated tool.
• Do not use solvents or any agressive cleaning products.
• Clean the device's surfaces with a dry cloth.
Regulations:
Device complies with europeans directives.
The certificate of compliance is available on our website.
EAEC Conformity marking (Eurasian Economic Community).
Waste management:
This product should be disposed of at an appropriate recycling fa-
cility. Do not throw away in a domestic bin.
Ecopackaging symbol
«The product's manufacturer contributes to the recycling of its pac-
kaging by contributing to a global recycling system».
TRIMAN symbol
«This product should be recycled appropriately».
PRODUCT IDENTIFICATION
At the back of the product, there is an identification plate on which the CE marking is affixed:
• Name and address of the manufacturer
• Date of manufacture
• Model
• Product Type
• Operating Voltage
This data must be specified for each maintenance intervention, or if spare parts are requested.
POWERDUCTION 37LG - 39LG - 50LG EN
23