Atlas Copco EBL25 Mode D'emploi page 4

Product information
If the tool is equipped with a reaction bar
The reaction bar is designed for absorbing the reaction torque of assembly power tools.
No other use is permitted. For professional use only.
Technical data
Ordering No
Model
Bit drive
Screw capacity
Model type
Shut-off system
Sound power
Sound pressure
Sound standard
Sound uncertainty
Speed range
Torque range
Torque range
Motor voltage
Motor power
Vibration standard
Vibration uncertainty
Vibration value
Weight
Weight
Service intervals
Service recommendations
Overhauls and preventive maintenance are recommended at regular intervals. If the machine is not working
properly, it should immediately be taken out of operation for inspection. At the overhauls, all parts should be
cleaned accurately, and defective or worn parts should be replaced.
4
EN
8431017023
EBL25
1/4" Hex
M2.5-4
Straight
Clutch
N/A dB(A)
<70 dB(A)
ISO15744
N/A dB(A)
930 r/min
1.0-2.5 Nm
8.8-22.1 in lb
30 V d.c.
70 W
ISO28927-2
N/A m/s²
<2.5 m/s²
0.8 kg
1.8 lb
© Atlas Copco Industrial Technique AB - 9836 8198 00
EBL25