Télécharger Imprimer la page

Gamko MG/300 Mode D'emploi page 28

Publicité

Les langues disponibles

Les langues disponibles

Chapter 3
• Clean the cabinet prior to use. For further details we refer to chapter maintenance.
• Leave the installation to stand for at least 2 hours before switching on the cabinet.
• Plug into a grounded power socket.
MG/300 & MG/500 plug ready models have an electronic thermostat.
Using the thermostat
For use and settings of the thermostat, please refer to the manual supplied with this
product.
XR02CX
To see the set point.
1.
Push and immediately release the SET key, the set point will be showed;
2.
Push and immediately release the SET key or wait about 5 sec to return to
normal visualisation;
To change the set point.
1.
Push the SET key for more than 3 sec, the value will be displayed and the °C
LED starts blinking;
2.
To change the set point value push the arrows and to memorise the new set
point value push the SET key again or wait 10sec.
28
User Manual
Using the appliance
Prior to use
EMERGENCY STOP
REMOVE THE PLUG FROM THE SOCKET!
Thermostat

Publicité

loading

Ce manuel est également adapté pour:

Mg/500Mg2/300Mg2/500