Hint! Never install the refrigerator next to a heat source!
A refrigerator works by extracting heat from the space to be refrigerated and to
release this in the surrounding area.
For maximum air circulation it is recommended to allow at least 5 cm space around
the refrigerator. Be very careful never to obstruct the air inlets and outlets.
Place the product on a smooth surface.
1 Place the product at his position.
2 Make sure the product is standing level using a spirit level.
3. The product must be placed with feet to provide adequate air circulation around
the cabinet. This for an optimal operation of the product and to dispose a possible
leakages of R600a. Also, the legs are used for product adjustment and leveling.
4. To meet the ECA criteria of the M2 temperature class, the thermostat must set at
an set point of;
•
MG/300:
•
MG/500:
•
MG2/300
•
MG2/500
Chapter 2
Operating principle
Installing the product
3,5°C
5,0°C
3,0°C
3,0°C
User Manual
Installation
25