Publicité
Les langues disponibles
Les langues disponibles
Before any maintenance or cleaning work, lay the
water pump down on a level surface, switch off the
engine and remove the spark plug cap from the spark plug.
All maintenance/repair work requiring the opening of the
engine may only be carried out by the brand's own
technical service department.
1. Unscrew the bolt and remove the air filter cover (6);
2. Blow the filter element out with compressed air until it is
completely clean;
3. Fit the filter element and assemble the other
components in reverse order of disassembly.
Using a dirty filter will restrict the air flow into the
carburettor affecting the performance of the pump.
1.
To ensure proper engine operation, the spark plug should
be clean and with adequate gap between the electrodes.
1. Remove the spark plug cap, unscrew the spark plug and
check that it is clean;
2. Measure the distance between the electrodes with
appropriate tools. The distance should be between 0.7-
0.8 mm. If necessary, bend the electrode until enough
clearance is reached;
3. Install the spark plug with your hand to prevent damage
to the thread and tighten it to compress the sealing
washer, using the wrench provided;
4. If the spark plug does not produce any sparks, replace
it.
A loose spark plug may overheat and cause damage
to the engine.
Clean the machine after each use. Careful handling
protects the water pump and increases its service life.
Before cleaning, allow the combustion engine to cool down
completely and remove the water pump hoses and clean
the accessible areas with a damp cloth.
Pump's cleaning:
1. Remove the water filling cap and drain plug from the
pump housing;
2. Pour clean water into the filling hole (9) until the pump
housing (11) is completely clean;
3. Remove the water filling cap and drain plug from the
pump housing.
2.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of combustion equipment's in your
household waste!
Waste such as used oil, fuel, lubricant, filters and wearing
parts can harm humans, animals and the environment and
as such must be properly disposed of.
Make sure that the deactivated water pump is forwarded for
disposal in a technically correct way.
You can obtain information regarding the disposal of the
petrol water pump and used oil from the legal responsible
for recycling in your city.
WhatsApp:
E-mail:
Water filling cap
Pump housing drain plug
+351 967 817 569
support@vito-tools.com
Publicité
