One for All URC-6020 B00 Mode D'emploi page 9

O F A 6 U R
NE OR LL NIVERSAL EMOTE
All manuals and user guides at all-guides.com
5. Aim the remote control at the
device and press POWER once. It
should turn off. If the device
does not respond, repeat steps 2
through 4, trying each code for
your brand until you find one
that works. If it still does not
work, try "Searching for Your
Code", below.
SEARCHING FOR YOUR
CODE
If your device does not respond to the
remote control after trying all codes
listed for your brand, or if your brand
is not listed at all, try searching for
your code. For example, to search for
a code for your TV:
1. Turn on your TV and on the
remote control, press TV once.
2. Press and hold SET until the LED
(red light) blinks twice, then
release SET.
Enter 9 9 1. The LED will blink
3.
twice.
4. Select a test function from the
list below or use the default test
function (POWER) and skip step
4.
NOTE: The keys that can be used for the
test function are 0, 1, 2, 3, POWER, VOL
+, Play, Stop and Mute.
Press CH+ to begin searching for
5.
your code. Stop the search when
the device turns off or performs
the function selected in step 4 (if
other than POWER).
NOTE: In the search mode, the remote
control will send IR codes from its
library to the selected device, starting
with the most popular code first. Every
press of CH+ will send a new code. If
you go past the code that performed
the Test Function, you can go back by
pressing CH-.
6. To lock in the code, press and
release the SET key. The LED
blinks twice.
7. To search for the codes of your
other devices, repeat steps 1
through 6, but substitute the
appropriate device key for the
device you are searching for in
step 1.
8 Searching for Your Code
C
ONTROL
CHECKING THE CODES
If you have set up the remote control
using the Searching For Your Code
procedure, you may need to find out
which four-digit code is operating
your equipment. For example, to find
out which code is operating your TV:
1. On the remote control, press TV
once.
2. Press and hold SET until the LED
(red light) blinks twice, then
release SET.
3. Enter 9 9 0. The LED will blink
twice.
4. To view the code for the first
digit, press 1 once. Wait 3
seconds, count the LED blinks
(e.g., three blinks = 3) and write
down the number in the
leftmost box in the TV code
boxes on page 7.
NOTE: If a code digit is 0, the LED will
not blink.
5. Repeat step 4 three more times
for remaining digits. Use 2 for
the second digit, 3 for the third
digit, and 4 for the fourth digit.
Write down the code digits in
the remaining TV code boxes on
page 7.
6. To check for codes of other
devices, repeat steps 1 through
5, but substitute the appropriate
device key for each device you
are checking. Write down the
device's code digits in the
appropriate code boxes on page
7.
USING MACROS
You can program the M1 and M2 keys
on your One For All 6L Universal
Remote Control (URC-6020 B00) to
perform repetitive, time-consuming
operations for easy, convenient access
through the press of a single key.
Macro keys are ideal for home theater
operations, setting a favorite channel,
guide steps, or other multiple
functions you would like to control
with one key press. Moreover, each
macro key can hold up to a total of 20
key presses.