One for All URC-6020 B00 Mode D'emploi page 15

O F A 6 U R
NE OR LL NIVERSAL EMOTE
All manuals and user guides at all-guides.com
SOLUTION: Make sure the
remote control is
aimed at your
home
entertainment
device and is not
farther than 15
feet away.
PROBLEM: The unit does not
control home
entertainment
devices or
commands are not
working properly.
SOLUTION: Try all listed codes
for the device
brands being set
up. Make sure they
can be operated
with an infrared
remote control.
PROBLEM: TV/VCR Combo
does not respond
properly.
SOLUTION: Use the VCR codes
for your brand.
Some combo units
may require both
a TV code and a
VCR code for full
operation.
PROBLEM: Changing
channels does not
work properly.
SOLUTION: If the original
remote control
required pressing
ENTER to change
channels, then
press ENTER on
the remote control
after entering the
channel number.
PROBLEM: Tried Searching
For Your Code
method and still
could not find a
working code.
14 Troubleshooting
C
ONTROL
SOLUTION: Clear the device
key as follows:
Press and hold SET
until the LED (red
light) blinks twice,
then release.Next
enter 9 9 2. Then
press the device
key to be cleared
twice.Now repeat
the Searching for
Your Code method
on page 8.
PROBLEM: CH+ and CH- do
not work for your
RCA TV.
SOLUTION: Due to RCA design
(1983-1987), only
the original
remote control
will operate these
functions.
PROBLEM: No remote control
of volume.
SOLUTION: See "Changing
Volume Lock" on
page 12 to lock/
unlock volume.
PROBLEM: If the above does
not work.
SOLUTION: Please contact us
in any of the
following ways:
• Please visit:
www.oneforall.
com
• If the above
website is not
able to provide
you with the
information
you need,
please email us
at
ofasupport@u
eic.com and
refer to
"Troubleshooti
ng"
• Customer
Support: (330)
405-8516
Mon- Fri from
9AM to 5PM
ET