NARDA FieldMan Guide Rapide page 37

4
Device settings
4.1 Setting types
On this device, a distinction is made between Device settings and
Measurement settings.
4.1.1 Device settings
Device settings include all parameters that affect the general device behavior or the form
of the display, but do not affect the measurement itself. The device always remembers
the last device settings used. Depending on the data logger configuration, these settings
are saved on the micro SD card or in the internal memory and loaded the next time the
device is started. Device settings, with the exception of EXPERT SETTINGS, are not
saved in a setup.
⇒
Detailed information about all device settings can be found in the instruction manual.
4.1.2 Measurement settings
These include all parameters that influence a measurement. They are combined in the
SK2 softkey and are complemented by the settings under EXPERT SETTINGS. Only
measurement settings are used for saving and loading a setup.
⇒
Detailed information on all measurement settings can be found in the description of
the respective operating modes in the instruction manual.
4.1.3 Resetting settings
Via Factory Reset both settings types can be reset to the factory default.
Narda FieldMan
4 Device settings
37