NARDA FieldMan Guide Rapide page 35

3.2.2 Selecting an operating mode
⇒
Press SK1 , use the ▲▼ keys to highlight an entry, and use the
it.
⇒
For information on the operating modes, see 5 Operating modes on page 39.
3.2.3 Changing the measurement settings in an
operating mode
✓ The desired operating mode is active.
⇒
Press SK2 , use the ▲▼ keys to highlight an entry, and use the
it.
⇒
For information on the menus and functions, see the descriptions of the respective
operating mode in the instruction manual.
Simplified representation
In the following descriptions, this simplified representation is used for changes in the
measurement settings:
⇒
MEASUREMENT SETTINGS: ... (corresponding action).
3.2.4 Starting and pausing/stopping a measurement
⇒
Press SK3.
3.2.5 Changing the device settings
⇒
Press SK4 .
⇒
For information on device settings, see 4 Device settings on page 37.
3.2.6 Exiting a submenu
⇒
Press key.
Narda FieldMan
3 General operation
●
key to select
●
key to select
35