NARDA FieldMan Guide Rapide page 33

Select the country of use:
✓ The device is being operated for the first time or a factory reset has been performed.
⇒
On the start screen, select the country of use from the drop-down menu and confirm
with OK.
Changing the country setting at a later date:
A factory reset must be performed for this purpose.
1. Press SK4 to open the device settings.
2. Perform the reset under GENERAL SETTINGS > DEVICE > Factory Reset.
3. On the start screen, select the country of use from the drop-down menu and confirm
with OK.
2.5.5 Select place of data storage
In the data logger, select whether the data is to be saved on the memory card or in the
internal memory. If the memory card is deactivated, the data is stored internally.
1. Press SK4 to open the device settings.
2. Select DATA LOGGER . (see manual)
3. Activate or deactivate memory card.
Narda
2 Connection and commissioning
FieldMan 33