Sommaire des Matières pour Delta Tommy 587LF Serie
Page 1
• LIRE TOUTES les instructions avant de débuter. • LIRE TOUTES les avertissements ainsi que toutes les instructions de nettoyage et d’entretien. • Acheter le bon nécessaire de raccordement. Para instalación fácil de su llave Delta usted necesitará: • LEER TODAS las instrucciones completamente antes de empezar.
Page 2
All manuals and user guides at all-guides.com Faucet Installation Install lift rod (1). Position faucet (2) with single or three hole escutcheon (3) and baseplate or gasket (4) on sink. Option: If surface of sink is uneven, use silicone under the baseplate or gasket. Place mounting hardware (5) over mounting studs (6) under sink.
Page 3
All manuals and user guides at all-guides.com Pop-Up with Metal Flange and Plastic Tail Piece With pivot (1) facing toward faucet, pull pop-up Remove pivot nut (1). Install horizontal rod (2) Remove stopper (1), brass nut and washer (2), straight down into drain hole and secure gasket and stopper (3) as removable (4) or non- black gasket (3) and tailpiece (4).
Page 4
All manuals and user guides at all-guides.com Maintenance CONNECT TO WATER SUPPLIES. Remove aerator (1) using supplied wrench (2) and turn faucet handles (3) to the full on mixed position. Turn on hot and cold water supplies (3) • If faucet leaks from under handle: and flush water lines for one minute.
Page 5
All manuals and user guides at all-guides.com ▲Specify Finish Précisez la Finition Especifique el acabado RP64379▲ Handle Assembly Montage de la manette Conjunto de manija RP64380▲ Embase Tapa RP64381 Cartridge and Retainer Ring Cartouche et anneau de rétention Cartucho y anillo de retención RP51345▲...
Page 6
1 de enero 1995 e instaladas en los Estados Unidos de América, Canadá y México. uso y servicio normal. Si la reparación o su reemplazo no es práctico, Delta Faucet Company tiene DELTA FAUCET COMPANY NO SE HACE RESPONSABLE POR CUALQUIER DAÑO ESPECIAL, la opción de reembolsarle su dinero por la cantidad del precio de compra a cambio de la devolución...