Bruder Mannesmann Werkzeuge 12598 Manuel D'instructions page 39

Drilling
Switch off the hammer-action function to drill into smooth or sensitive
surfaces such as ceramic tiles.
•
Press release-knob (13) and turn the mode
selection switch (6) with the arrow in position ( )
to switch off the hammer-action function.
Hammer-action drilling
Set your drill to hammer action for drilling into stone,
concrete, bricks and roof tiles etc.
•
Turn the mode selection switch (6) with the arrow in
position (
function.
NOTE: Only change the mode switch (6) positions with your drill is
switched off.
Switching your drill on and off
•
To switch it on: squeeze the on/off trigger (7).
•
To switch it off: release the on/off trigger (7).
) to switch on the hammer-action
GB - 39