Publicité
Les langues disponibles
Les langues disponibles
Make adjustments using the large hexagon wrench while holding the media guide bar. Turn the
18.
adjustment screw counterclockwise to move the line back, and turn it clockwise to move the line
forward. The line will move approximately 1 mm with each turn of the screw. Continue to turn the
adjustment screw until the measurements are the same.
Use the small hexagon wrench to tighten the two screws.
19.
All manuals and user guides at all-guides.com
Adjusting the Take-up Reel
|
27
Publicité
