Candy CC2 67 T Mode D'emploi page 11

Ofrecido por www.electromanuales.com
All manuals and user guides at all-guides.com
40003874Eng.qxd 20/09/2005 18:57 Page 11
Controls and indicators
COUNTDOWN
FILTER CARE INDICATOR
EMPTY WATER INDICATOR DISPLAY
PROGRAMME
ACRYLICS/ START START DELAY ON/OFF
SYNTHETICS BUTTON BUTTON BUTTON SELECTOR
BUTTON
Control panel and indicator lights
Programme Selector – Select the required programme
On/Off button and indicator – Press to switch on, the indicator will light
Start – Press Start to commence the selected drying programme. Press for 5
seconds to cancel/reset the programme
Acrylics/Synthetics button – Press to reduce the heat level for delicate
items, the indicator above the button will light up. To change the heat setting
the programme must be reset
Low Heat – Indicator light ON High Heat – Indicator light OFF
Empty Water indicator – lights when the water container is full
Filter Care indicator – lights when the filter needs cleaning
Start Delay button – Allows the user to delay the start of the drying cycle
(see details of operation page 16)
COUNTDOWN Display
START – When the dryer is switched On the START indicator will flash, when
the programme starts the START indicator will light up
60' – Indicator lights when there is less than 60 minutes left until completion
of the programme
15' - Indicator lights when there is less than 15 minutes left until completion
of the programme. At this stage of the drying cycle the machine enters the
Cool Down phase
STOP - Indicator lights when the programme is finished.
6h - 6 hour start delay (light flashes when in operation)
9h - 9 hour start delay (light flashes when in operation)
11