Ten Haaft VISION CONTROL CENTER Mode D'emploi Abrégé page 15

SHORT USER MANUAL VISION CONTROL CENTER
Menu-System Vision Control Center für Caro
Press and hold "OK" on "Info" (press and hold "Update" on the app)
→ System
28
→ Test Limits
→ Start Test...
Minimal Ealevation
Maximal Elevation
→ Demo Mode
→ Arm Adjust
→ Starting...
→ LNB Detection
→ Signal Adjust
→ Model Selection
→ Oyster 4 (4pol)
→ Cytrac/Caro+ (4pol)
→ Caro (14pol)
→ Oyster (14pol)
SHORT USER MANUAL VISION CONTROL CENTER
Starts the test run with the maximum positions
Starts the test run with the maximum positions
Restriction of the minimum elevation to allow special installation situations
Restriction of the minimum elevation to allow special installation situations
Restriction of the maximum elevation to allow special installation situations
Restriction of the maximum elevation to allow special installation situations
"Off," "Demo1" to "Demo9"
„Off," „Demo1" to „Demo9"
Elevation position of the demo mode satellite (10-50 °)
Azimuth position of the demo mode satellite (10-350 °)
With the OK button, the extended antenna is retracted to the limit switch
With the OK button, the extended antenna is retracted to the limit switch
"on" (default) or "off" -> possibility to switch off the LNB detection in difficult cases
„on" (default) or „off" -> possibility to switch off the LNB detection in difficult cases
"Optimal", "Level 0", Level 1 "," Level 2 "or" Level 3 "
„Optimal", „Level 0", Level 1 „," Level 2 „or" Level 3 „
Possibility to select the connected external unit
Possibility to select the connected external unit
29