Maytag Commercial MLG30PDBWW Manuel De Programmation page 6

0.50 0.
WHITES AND COLORS TEMPERATURE SETTING DEFAULT 150 DEGREES
50
Represents the degrees in Fahrenheit temperature (plus 100 degrees). Example: 50 equals 150 degrees.
By pressing the WHITES and COLORS keypad you can adjust the value from 100 degrees to 160 degrees.
Press PERMANENT PRESS keypad once to advance to next code.
0.40 0.
PERMANENT PRESS TEMPERATURE SETTING DEFAULT 140 DEGREES
40
Represents the degree in Fahrenheit temperature (plus 100 degrees). Example: 40 equals 140 degrees.
By pressing the WHITES and COLORS keypad you can adjust the value from 100 degrees to 160 degrees.
Press PERMANENT PRESS keypad once to advance to next code.
DELICATES TEMPERATURE SETTING DEFAULT 130 DEGREES
0.30 0.
Represents the degrees in Fahrenheit temperature (plus 100 degrees). Example: 30 equals 130 degrees.
30
By pressing the WHITES and COLORS keypad you can adjust the value from 100 degrees to 160 degrees.
Press PERMANENT PRESS keypad once to advance to next code.
Whites and colors cool down time DEFAULT 2 MIN
P.02 P.
Represents the number of minutes of cool down. Example: 02 equals 2 minutes of cool down time.
02
By pressing the WHITES and COLORS keypad you can adjust the value from 2 to 3 minutes.
Press PERMANENT PRESS keypad once to advance to next code.
PERMANENT Press cool down time DEFAULT 2 MIN
P.02 P.
Represents the number of minutes of cool down. Example: 03 equals 3 minutes of cool down time.
02
By pressing the WHITES and COLORS keypad you can adjust the value from 2 to 3 minutes.
Press PERMANENT PRESS keypad once to advance to next code.
Delicates cool down time DEFAULT 2 MIN
P.02 P.
Represents the number of minutes of cool down. Example: 03 equals 3 minutes of cool down time.
02
By pressing the WHITES and COLORS keypad you can adjust the value from 2 to 3 minutes.
If cycle counter (90C) is selected, the following will display:
If money counter (1.0C or 1.C0) is selected, the following will display:
End of Setup Codes.
Exit From Setup Mode.
6
100 Represents the number of cycles in HUNDREDS. 1 02 = 200
200 Represents the number of cycles in ONES.
This is "VIEW ONLY" and cannot be altered.
Press PERMANENT PRESS keypad once to advance to next code.
300 Number of dollars in HUNDREDS
400 Number of dollars in ONES.
400 Number of CENTS
2 25 = 25
Total = 225 Cycles
3 01 = 100
4 68 = 68
5 75 = 75
Total = $168.75