Maytag Commercial MLG30PDBWW Manuel De Programmation page 3

Control Setup Procedure ____________
The fabric setting keypads along with the digital display are
used to setup the dryer controls.
The display can contain 3 numbers or letters and a decimal
point. These are used to indicate the price, time remaining
and setup codes and related code values available for use in
programming the appliance.
How To Use The Keypads
To Program The Controls
The WHITES & COLORS keypad is used to adjust the values
associated with setup codes. Pressing the keypad will
increment the value by 1. Rapid adjustment is possible by
holding the keypad down.
EXPLANATION
CODE
REGULAR CYCLE PRICE
601 6
01 Represents the number of quarters (coin 1); may adjust from 0-39. (See VALUE OF COIN 1)
Advance from 0-39 by pressing WHITES & COLORS. Defaults to 1 quarter - $.25.
Press PERMANENT PRESS keypad once to advance to next code.
7
REGULAR DRY TIME
706
Represents the number of minutes per quarter (coin 1). Defaults to 6 minutes per coin.
06
Example: 2 quarters times 6 minutes = 12 minutes. By pressing the WHITES & COLORS keypad you can
adjust the value from 1-99 minutes.
Press PERMANENT PRESS keypad once to advance to next code.
TYPE OF DRYER PRICING
800 8
Fixed Cycle with Top Off. For detailed description see General User Information section.
00
Fixed Cycle. For detailed description see General User Information section.
FC
Use DELICATE keypad to make this selection.
Press PERMANENT PRESS keypad once to advance to next code
CYCLE COUNTER OPTION
900 9
This option is either SELECTED "ON" or NOT SELECTED, "OFF."
00 Not Selected, "OFF"
0C
Selected "ON" and not able to be deselected. Press DELICATES keypad 3 consecutive times to select
"ON." Once selected "ON" it cannot be deselected.
Press PERMANENT PRESS keypad once to advance to next code.
MONEY COUNTER OPTION
This option is either SELECTED "ON" or NOT SELECTED, "OFF."
1.00 1.
Not Selected, "OFF"
00
Selected "ON."
0C
Press DELICATES keypad 3 consecutive times to remove (Not Selected "OFF.")
Counter resets by going from "OFF" to "ON."
Press PERMANENT PRESS keypad once to advance to next code.
Selected "ON" and not able to be deselected.
C0
To select "ON" and not able to be deselected, first select "ON," then within two seconds press DELICATES
twice, WHITES & COLORS once, and exit setup mode.
The PERMANENT PRESS keypad will advance you through
the setup codes. Pressing the keypad will advance you to
the next available setup code. Holding the keypad down will
automatically advance through the setup codes at a rate of 1
per second.
The DELICATES keypad is used to select or deselect
options.
Start Operating Setup
Before proceeding it is worth noting that, despite all the
options available, an owner can simply choose to uncrate a
new commercial dryer, hook it up, plug it in and have a unit
which operates.
PD units are preset at the factory for fixed cycle price with
top off.
The setup code is indicated by the left-hand character.
The setup code value is indicated by the two right-hand
characters.
NOTE: On stacked dryers programming selections apply to
both dryers.
3