Maytag Commercial MLG30PDBWW Manuel De Programmation page 5

VAULT VIEWING OPTION
A.00 A.
This option is either SELECTED "ON" or NOT SELECTED, "OFF".
Not Selected, "OFF".
00
Selected "ON".
Press DELICATES keypad once for this selection. When selected, the money and/or cycle counter will be
SC
viewable (if counter is selected 90C and/or 1.0C or 1.C0), when the coin box is removed.
Press PERMANENT PRESS keypad once to advance to next code.
VALUE OF COIN 1.
b.05 b.
This represents the value of coin 1 in number of nickels.
05
Defaults to 05 = $0.25.
By pressing WHITES & COLORS keypad you have the option of 1-99 nickels.
Press PERMANENT PRESS keypad once to advance to next code.
VALUE OF COIN 2.
C.20 C.
This represents the value of coin 2 in number of nickels.
20
Defaults to 20 = $1.00.
By pressing WHITES & COLORS keypad you have the option of 1-99 nickels.
Press PERMANENT PRESS keypad once to advance to next code.
COIN SLIDE OPTION
d.00 d.
This option is either SELECTED "ON" or NOT SELECTED, "OFF".
Not Selected, "OFF".
00
Selected "ON".
CS
Press DELICATES keypad 3 consecutive times for this selection. When the coin slide mode is selected,
set b. equal to value of slide in nickels. Set code 6 XX (REGULAR CYCLE PRICE) and code 3.XX
(SPECIAL CYCLE PRICE) to number of slide operations.
NOTE: If the installer sets up "CS" on a coin drop model, it will not register coins.
Press PERMANENT PRESS keypad once to advance to next code.
E.00
ADD COINS OPTION
E.
This option is either SELECTED "ON" or NOT SELECTED, "OFF".
This option causes the customer display to show the number of coins (coin 1) to enter, rather than the
dollars-and-cents amount.
Not Selected, "OFF".
00
AC
Selected "ON".
Press DELICATES keypad 3 consecutive times for this selection.
Press PERMANENT PRESS keypad once to advance to next code.
J.Cd
J. COIN or DEBIT OPTION
Both coin & debit selected.
Cd
Coins selected, debit disabled.
C
d
Debit Card selected, coin disabled.
Press DELICATES keypad 3 consecutive times for this selection.
Press PERMANENT PRESS keypad once to advance to next code.
L.00 PRICE SUPPRESSION OPTION
L.
This option is either SELECTED "ON" OR NOT SELECTED, "OFF".
This option causes the customer display to show "AVAILABLE" or "ADD" rather than the amount of money
to add. (Used mainly in debit installations.)
Not Selected, "OFF".
00
PS
Selected "ON".
Press PERMANENT PRESS keypad once to advance to next code.
CLEAR ESCROW OPTION
n.00 n.
This option is either SELECTED "ON" OR NOT SELECTED "OFF".
When selected, money held in escrow for 30 minutes without further escrow or cycle activity will be cleared.
Not Selected, "OFF".
00
Selected "ON".
CE
Press PERMANENT PRESS keypad once to advance to next code.
5