Strong SRT 6010 Mode D'emploi page 15

UM 6005-15 ENG 1/26/06
PART 1 English
It is recommended that you perform the first time installation following the Installation Wizard step by
step. It will help you to easily achieve system configuration and channel installation. If you are a profes-
sional installer then you can skip wizard by pressing MENU button and set-up channels using the
Installation menu. Press UP/DOWN to choose your language, press OK to confirm. The select satellite
menu will appear as below.
Future installation steps are depend from satellite where your dish is aimed.
1. Your dish is aimed to Astra 1C, 1E, 1F or Hotbird satellite.
Press UP/DOWN to select the ASTRA or Hotbird satellite and press OK button on your remote control.
Below screen will appear.
Follow instruction written on screen. When you have fixed your dish at correct direction choose NEXT
and press the OK button. The channel Setup menu will appear as shown on screen 8.
2. Your dish is aimed at another satellite, select "Other" in "Select satellite" menu and press
OK, more satellite will appear in the satellite list, you can select the satellite you want.
4:18 PM Page 15
All manuals and user guides at all-guides.com
SCREEN 2
SCREEN 3
15