Strong SRT 6010 Mode D'emploi page 10

UM 6005-15 ENG 1/26/06
3.0 Connections
3.1 Connecting to TV & VCR
<Basic connection with a coaxial cable>
1. Connect the satellite signal from the LNB to the SAT IN connector.
2. Connect a UHF coaxial lead coming from your Cable TV or Outdoor Antenna to the ANT
input connector at the back of the receiver.
3. Connect a coaxial cable to the RF OUT connector at the back of the receiver.
4. Connect the other end of this coaxial cable to the ANT IN connector of your TV set.
<Advanced connection of the receiver to the TV set and VCR>
1. Connect the satellite signal from the LNB to the SAT IN connector.
2. Connect the TV scart connector at the back of the receiver to the scart-in connector on your TV set.
3. Connect the VCR scart connector at the back of the receiver to the scart-in connector on your VCR.
1
Only for model SRT 6015
2 Only for model SRT 6010 and 6015
10
4:18 PM Page 10
All manuals and user guides at all-guides.com
1
FIGURE 4. Basic connection with a Scart cable
PART 1 English
2