Strong SRT 6010 Mode D'emploi page 17

UM 6005-15 ENG 1/26/06
PART 1 English
When you have completed the adjustment, choose NEXT and press the OK button. The channel Setup
menu will appear as shown on screen 8.
2b. If you have a DiSEqC Dish, you can set "Antenna mode" to DiSEqC 1.2, choose NEXT and
press the OK button. The menu Adjust antenna will appear as shown on screen 7.
You should select transponder receivable at your location (choose "Transponder" field and select
transponder by pressing LEFT/RIGHT button). Then choose field "Move Dish" and adjust position of
the dish by pressing the LEFT/RIGHT button. Once you adjust the dish position choose "Store position",
set number of the position by pressing LEFT/RIGHT button. Then choose NEXT and press the OK
button. You will be guided to Channel Setup menu as shown on screen 8 below.
4:18 PM Page 17
All manuals and user guides at all-guides.com
SCREEN 6
SCREEN 7
17