Tyco TA Serie Guide D'installation Et D'utilisation page 15

All manuals and user guides at all-guides.com
New offset = T menu 1 - T surface
Example: Use the floor sensor temperature value from menu
1. If this value is 27°C and the floor surface thermometer
shows 24°C, the new offset value will be 27-24 = 3.
Change the offset from 4°C to 3°C.
Push confirmation button several times (scroll through
Menu structure) for leaving the Calibration mode to Normal
mode
6. Reset to factory settings.
set value floor sensor mode <
set value room sensor mode <
floor sensor offset value <
Reset: switch "off" the thermostat <
< > simultanously with switching "on" <
thermostat "000" is displayed. Press <
displayed. The thermostat is reset.
T menu1
>
>
>
>. Press <
> the
> and "CLR" is
T surface
23°C
20°C
4°C
> and
15