TP-Link TL-WPA4220T Mode D'emploi page 15

English
Read this to install additional devices
1� Make sure the additional devices use factory default settings� If
not, please reset them�
2� If the additional devices have Wi-Fi Clone function, follow step 1
and 2 of Method 2 to install them� If not, skip this�
3� Plug them into the outlets and wait about 1 minute until their
Powerline LEDs turn solid�
TL-PA4010
Installation is completed when all the
Powerline LEDs turn solid�
If the Powerline LEDs do not turn solid, please follow the instructions in
FAQ->Q1:
1� For the two devices connected before, use the Pair Button to create a
powerline network (Q1->A)� (Skip this step if you have already done this�)
2� For additional devices, use the Pair Button to join the existing powerline
network (Q1->B)�
All manuals and user guides at all-guides.com
AV500
TL-WPA4220 TL-WPA4220
14
AV500 AV500
Additional Device