TP-Link TL-WPA4220T Mode D'emploi page 12

All manuals and user guides at all-guides.com
Method 1: Plug and Play
Create a New Wireless Network
1� Write down the default wireless network name (SSID) and
password of TL-WPA4220�
* The default SSID is TP-LINK_XXXXXX� (XXXXXX indicates the last six
unique characters of the WLAN MAC address�)
2� Connect your devices as follows�
Enjoy! Use the default SSID (TP-LINK_xxxxxx or TP-LINK_yyyyyy)
and password you wrote down to access the Internet�
If the Powerline LEDs don't turn solid, reset all the powerline devices, or
create a powerline network by referring to FAQ-Q1.
Wireless Network Name (SSID)*:
TP-LINK_XXXXXX
Wireless Password:
XXXXXXXX
TL-PA4010
All the Powerline LEDs will
turn solid within 1 minute�
SSID:
TP-LINK_xxxxxx
TL-WPA4220
AV500
SSID:
TP-LINK_yyyyyy
TL-WPA4220
AV500
11
SSID:
ABCDE
Internet
LAN WAN
English