TP-Link TL-WPA4220T Mode D'emploi page 13

English
Read this to install additional devices
1� Make sure the additional devices use factory default settings� If
not, please reset them�
2� Plug them into the outlets and wait about 1 minute until their
Powerline LEDs turn solid�
TL-PA4010
Installation is completed when all the
Powerline LEDs turn solid�
If the Powerline LEDs do not turn solid, please follow the instructions in
FAQ->Q1:
1� For the two devices connected before, use the Pair Button to create a
powerline network (Q1->A)� (Skip this step if you have already done this�)
2� For additional devices, use the Pair Button to join the existing powerline
network (Q1->B)�
Method 2: Setup via Wi-Fi Clone
Extend the Router's Wireless Network
1� Plug TL-WPA4220 into a wall socket near your router�
All manuals and user guides at all-guides.com
AV500
TL-WPA4220 TL-WPA4220
AV500
TL-WPA4220
12
AV500
Additional Device
Wireless Router
(supporting WPS)
Blink quickly in about
15 seconds�
AV500